Standard grease filters

c/w Handles

~ Aluminium Frames ~ Handles included ~ Galvanised Steel Frames Available ~ Punched Drain Holes ~ Fold Down Handles

Applications

Grease filters are generally installed in canopies above ranges of cooking equipment, to eliminate or greatly reduce the problem of cooking oil etc., being drawn into and settling in the extract ductwork.

This significantly reduces the frequency of expensive duct cleaning, and offers some protection against grease-fire hazards

Description

The filtration media is crimped galvanised knitted wire mesh, which is enclosed in either an aluminium or galvanised channel frame. Galvanised retaining meshes are fitted to both faces, and corner gussets provide rigidity.

Handles are normally desirable on grease filters for ease of removal and cleaning, but these are optional.

Technical

Face velocity : 3.0 m/s (600 ft/min) Nominal to Actual size: less 12mm on H & W and 3mm on depth

Please fill in the following form and we will get back to you as soon as possible.